RUCKUS Cloud supported Wi-Fi APs and switches

RUCKUS Cloud supports a broad range of our ICX switches and Wi-Fi access points


We highly recommend buying the standard RUCKUS APs and switches listed below for your RUCKUS Cloud deployment.

RUCKUS Cloud Supported 802.11ax and 802.11ac Access Points
Indoor Access Points

R850 (Supported from June 17, 2020; Cloud portal version: 20.04.12)
R750
R730
R720
R710
R650
R610
R550 (Supported from June 17, 2020; Cloud portal version: 20.04.12)
R510
R320
R310
H510
H320

End of Life Products
R600
R500

Outdoor Access Points

* Available only on the latest cloud version


RUCKUS Cloud Supported ICX Switches
Switch Product Series*

* Requires ICX release 8.0.90d and above


Migration information:
  • If you intend to migrate your existing Unleashed APs to RUCKUS Cloud, follow these guidelines.
  • If you currently have a ZoneDirector or SmartZone controller onsite, please disable automatic AP addition option on the controller prior to connecting a new AP to RUCKUS Cloud.
  • If you intend to migrate existing controller-managed RUCKUS APs to Cloud, please contact your RUCKUS Partner.
Unsure if your AP is supported? Check the manufacture date.


Most RUCKUS APs manufactured after November 2016 are supported by RUCKUS Cloud. To find out whether your APs have the right cloud-ready firmware, please check this knowledge base article.​

The models manufactured before November 2016 (see the knowledge base article) need to be firmware upgraded to version 104 or later before connecting to the RUCKUS Cloud. Look for software downloads on each AP's page on RUCKUS Support. Even if your AP is end of life, it may still be supported with the right upgrade!