Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

R-85A-R1VB

2-port sector antenna, 2x 694–960 MHz, 85° HPBW, 1x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Radiator Material Aluminum
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 320 mm | 12.598 in
Depth 166 mm | 6.535 in
Length 1495 mm | 58.858 in
Net Weight, antenna only 12 kg | 26.455 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz
Polarization ±45°
Total Input Power, maximum 400 W

Electrical Specifications

R1 R1 R1
Frequency Band, MHz 698–806 790–894 890–960
RF Port 1,2 1,2 1,2
Gain, dBi 14.2 14.8 14.8
Beamwidth, Horizontal, degrees 81 77 75
Beamwidth, Vertical, degrees 14.4 13.1 12.1
Beam Tilt, degrees 2–12 2–12 2–12
USLS (First Lobe), dB 17 18 18
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 24 25 25
Isolation, Cross Polarization, dB 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150
Input Power per Port, maximum, watts 200 200 200

Mechanical Specifications

Wind Loading @ Velocity, frontal 604.0 N @ 150 km/h (135.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 200.0 N @ 150 km/h (45.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 662.0 N @ 150 km/h (148.8 lbf @ 150 km/h)
Wind Speed, maximum 200 km/h (124 mph)

Packaging and Weights

Width, packed 450 mm | 17.717 in
Depth, packed 280 mm | 11.024 in
Length, packed 1790 mm | 70.472 in
Weight, gross 21.8 kg | 48.061 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Radiator Material Aluminum
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 320 mm | 12.598 in
Depth 166 mm | 6.535 in
Length 1495 mm | 58.858 in
Net Weight, antenna only 12 kg | 26.455 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz
Polarization ±45°
Total Input Power, maximum 400 W

Electrical Specifications

R1 R1 R1
Frequency Band, MHz 698–806 790–894 890–960
RF Port 1,2 1,2 1,2
Gain, dBi 14.2 14.8 14.8
Beamwidth, Horizontal, degrees 81 77 75
Beamwidth, Vertical, degrees 14.4 13.1 12.1
Beam Tilt, degrees 2–12 2–12 2–12
USLS (First Lobe), dB 17 18 18
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 24 25 25
Isolation, Cross Polarization, dB 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150
Input Power per Port, maximum, watts 200 200 200

Mechanical Specifications

Wind Loading @ Velocity, frontal 604.0 N @ 150 km/h (135.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 200.0 N @ 150 km/h (45.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 662.0 N @ 150 km/h (148.8 lbf @ 150 km/h)
Wind Speed, maximum 200 km/h (124 mph)

Packaging and Weights

Width, packed 450 mm | 17.717 in
Depth, packed 280 mm | 11.024 in
Length, packed 1790 mm | 70.472 in
Weight, gross 21.8 kg | 48.061 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
UK-ROHS Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification