Warning Icon

For other alternatives, please contact us for more information.

0 Replacement products available

VVSSP-360S-F

10-port small cell antenna, 4x 1695–2690, 4x 3400-3800 and 2x 5150-5925 MHz. 360° Horizontal Beamwidth, fixed tilt.
Specifications
Finish making your selections or clear them to view relevant specifications.
How to Buy
Specifications

General Specifications

Antenna Type Small Cell
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 10
RF Connector Quantity, total 10

Dimensions

Length 600 mm | 23.622 in
Outer Diameter 200 mm | 7.874 in

5 GHz Port Power Table

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz | 3400 – 3800 MHz | 5150 – 5925 MHz
Polarization ±45°
Total Input Power, maximum 300 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1695–1920 1920–2180 2300–2690 3400–3800 5150–5925
Gain, dBi 6.6 7.3 8.2 4.9 5.1
Beamwidth, Horizontal, degrees 360 360 360 360 360
Beamwidth, Vertical, degrees 21.9 19.1 15.6 39 22.4
Beam Tilt, degrees 7 7 7 0 0
USLS (First Lobe), dB 14 14 12 19 9
Isolation, Cross Polarization, dB 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -150
Input Power per Port, maximum, watts 125 125 125 35 5

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1920 1920–2180 2300–2690 3400–3800 5150–5925
Gain by all Beam Tilts, average, dBi 6.3 7.1 7.9 4.7 4.4
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.5 ±0.5 ±0.3 ±1.1
Beamwidth, Vertical Tolerance, degrees ±2 ±2.3 ±1.5 ±5.7 ±6.5

Mechanical Specifications

Wind Loading at Velocity, frontal 131.7 lbf @ 150 km/h | 58.0 N @ 150 km/h
Wind Loading at Velocity, maximum 13.0 lbf @ 150 km/h | 58.0 N @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 320 mm | 12.598 in
Depth, packed 300 mm | 11.811 in
Length, packed 850 mm | 33.465 in
Net Weight, without mounting kit 7 kg | 15.432 lb
Weight, gross 9.6 kg | 21.164 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance

General Specifications

Antenna Type Small Cell
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 10
RF Connector Quantity, total 10

Dimensions

Length 600 mm | 23.622 in
Outer Diameter 200 mm | 7.874 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz | 3400 – 3800 MHz | 5150 – 5925 MHz
Polarization ±45°
Total Input Power, maximum 300 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1695–1920 1920–2180 2300–2690 3400–3800 5150–5925
Gain, dBi 6.6 7.3 8.2 4.9 5.1
Beamwidth, Horizontal, degrees 360 360 360 360 360
Beamwidth, Vertical, degrees 21.9 19.1 15.6 39 22.4
Beam Tilt, degrees 7 7 7 0 0
USLS (First Lobe), dB 14 14 12 19 9
Isolation, Cross Polarization, dB 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -150
Input Power per Port, maximum, watts 125 125 125 35 5

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1920 1920–2180 2300–2690 3400–3800 5150–5925
Gain by all Beam Tilts, average, dBi 6.3 7.1 7.9 4.7 4.4
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.5 ±0.5 ±0.3 ±1.1
Beamwidth, Vertical Tolerance, degrees ±2 ±2.3 ±1.5 ±5.7 ±6.5

Mechanical Specifications

Wind Loading at Velocity, frontal 131.7 lbf @ 150 km/h | 58.0 N @ 150 km/h
Wind Loading at Velocity, maximum 13.0 lbf @ 150 km/h | 58.0 N @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 320 mm | 12.598 in
Depth, packed 300 mm | 11.811 in
Length, packed 850 mm | 33.465 in
Net Weight, without mounting kit 7 kg | 15.432 lb
Weight, gross 9.6 kg | 21.164 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance