1. Inicio
  2. Tipo de red
  3. Emplazamientos de célula macro en exteriores
  4. Equipos RET y antenas para estaciones base
  5. Antenas para estaciones base
  6. 8P-2L6M-D4-V5
Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

8P-2L6M-D4-V5

8-port sector antenna, 2x 694–960 and 6x 1695–2690 MHz, 65° HPBW, 4x RET with tilt indicators

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • 4 Independent Arrays (1 Low band and 3 high bands) in a single radome housing
  • Optimized radome design leading to market leading wind load performance
  • Antenna with retractable tilt scale indicators and integrated pluggable RET
  • Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 6
RF Connector Quantity, low band 2
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 2x 8 pin connector as per IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female Pin3: RS485A(AISG_B), Pin5: RS485B(AISG_A), Pin6: DC 10~30V, Pin7: DC_ Return
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (3) | Low band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 301 mm | 11.850 in
Depth 181 mm | 7.126 in
Length 2688 mm | 105.827 in
Net Weight, without mounting kit 22.3 kg | 49.163 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W

Electrical Specifications

Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2200 2300–2500 2500–2690
Gain, dBi 16.5 16.7 16.7 17.7 17.9 17.5 17.7
Beamwidth, Horizontal, degrees 70 67 64 65 66 66 63
Beamwidth, Vertical, degrees 8.3 7.5 7.0 7.2 6.6 5.8 5.4
Beam Tilt, degrees 0–10 0–10 0–10 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 19 18 18 17 19 20 18
Front-to-Back Ratio at 180°, dB 30 33 33 36 35 31 33
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 30 31 29 31 30 28 28
Isolation, Cross Polarization, dB 27 27 27 27 27 27 27
Isolation, Inter-band, dB 27 27 27 27 27 27 27
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 500 500 500 300 300 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 441.0 N @ 150 km/h (99.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 374.0 N @ 150 km/h (84.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 746.0 N @ 150 km/h (167.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 448.0 N @ 150 km/h (100.7 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 411 mm | 16.181 in
Depth, packed 324 mm | 12.756 in
Length, packed 2814 mm | 110.787 in
Weight, gross 34.9 kg | 76.941 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 6
RF Connector Quantity, low band 2
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 2x 8 pin connector as per IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female Pin3: RS485A(AISG_B), Pin5: RS485B(AISG_A), Pin6: DC 10~30V, Pin7: DC_ Return
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (3) | Low band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 301 mm | 11.850 in
Depth 181 mm | 7.126 in
Length 2688 mm | 105.827 in
Net Weight, without mounting kit 22.3 kg | 49.163 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W

Electrical Specifications

Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2200 2300–2500 2500–2690
Gain, dBi 16.5 16.7 16.7 17.7 17.9 17.5 17.7
Beamwidth, Horizontal, degrees 70 67 64 65 66 66 63
Beamwidth, Vertical, degrees 8.3 7.5 7.0 7.2 6.6 5.8 5.4
Beam Tilt, degrees 0–10 0–10 0–10 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 19 18 18 17 19 20 18
Front-to-Back Ratio at 180°, dB 30 33 33 36 35 31 33
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 30 31 29 31 30 28 28
Isolation, Cross Polarization, dB 27 27 27 27 27 27 27
Isolation, Inter-band, dB 27 27 27 27 27 27 27
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 500 500 500 300 300 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 441.0 N @ 150 km/h (99.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 374.0 N @ 150 km/h (84.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 746.0 N @ 150 km/h (167.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 448.0 N @ 150 km/h (100.7 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 411 mm | 16.181 in
Depth, packed 324 mm | 12.756 in
Length, packed 2814 mm | 110.787 in
Weight, gross 34.9 kg | 76.941 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Line drawing

Product Compliance Documentation

Global Trade Data
Statement of Compliance RoHS/REACH

Product Information

Antenna Patterns | (login required)

Product Specification

8P-2L6M-D4-V5 Product specifications
8P-2L6M-D4-V5 Product specifications (Comprehensive)

Warranty

CommScope Limited Product Warranty

Assembly Drawing

Line drawing

Product Compliance Documentation

Global Trade Data
Statement of Compliance RoHS/REACH

Product Information

Antenna Patterns | (login required)

Product Specification

8P-2L6M-D4-V5 Product specifications
8P-2L6M-D4-V5 Product specifications (Comprehensive)

Warranty

CommScope Limited Product Warranty