Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RRVV-65D-R4VB

8-port sector antenna, 4x 694–960 and 4x 1695–2690 MHz, 65°HPBW, 4x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Antenna with retractable tilt scale indicators and integrated pluggable RET
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2497 mm | 98.307 in
Net Weight, antenna only 38.2 kg | 84.216 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,000 W

Electrical Specifications

R1,R2 R1,R2 R1,R2 Y1,Y2 Y1,Y2 Y1,Y2 Y1,Y2
Frequency Band, MHz 698–806 790–894 890–960 1695–1995 1920–2300 2300–2500 2490–2690
RF Port 1-4 1-4 1-4 5-8 5-8 5-8 5-8
Gain, dBi 16.2 16.7 16.8 17.9 18.4 18.3 18.0
Beamwidth, Horizontal, degrees 68 61 57 65 59 59 59
Beamwidth, Vertical, degrees 8.8 7.9 7.2 5.1 4.5 4.1 3.9
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 17 18 18 18 15 16
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 26 29 28 28 28 26 28
Isolation, Cross Polarization, dB 27 27 27 28 28 28 28
Isolation, Inter-band, dB 27 27 27 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153
Input Power per Port, maximum, watts 250 250 250 200 170 170 170

Mechanical Specifications

Wind Loading @ Velocity, frontal 971.0 N @ 150 km/h (218.3 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 312.0 N @ 150 km/h (70.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,363.0 N @ 150 km/h (306.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 769.0 N @ 150 km/h (172.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 593 mm | 23.346 in
Depth, packed 317 mm | 12.480 in
Length, packed 2820 mm | 111.024 in
Weight, gross 54 kg | 119.049 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2497 mm | 98.307 in
Net Weight, antenna only 38.2 kg | 84.216 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,000 W

Electrical Specifications

R1,R2 R1,R2 R1,R2 Y1,Y2 Y1,Y2 Y1,Y2 Y1,Y2
Frequency Band, MHz 698–806 790–894 890–960 1695–1995 1920–2300 2300–2500 2490–2690
RF Port 1-4 1-4 1-4 5-8 5-8 5-8 5-8
Gain, dBi 16.2 16.7 16.8 17.9 18.4 18.3 18.0
Beamwidth, Horizontal, degrees 68 61 57 65 59 59 59
Beamwidth, Vertical, degrees 8.8 7.9 7.2 5.1 4.5 4.1 3.9
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 17 18 18 18 15 16
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 26 29 28 28 28 26 28
Isolation, Cross Polarization, dB 27 27 27 28 28 28 28
Isolation, Inter-band, dB 27 27 27 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153
Input Power per Port, maximum, watts 250 250 250 200 170 170 170

Mechanical Specifications

Wind Loading @ Velocity, frontal 971.0 N @ 150 km/h (218.3 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 312.0 N @ 150 km/h (70.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,363.0 N @ 150 km/h (306.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 769.0 N @ 150 km/h (172.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 593 mm | 23.346 in
Depth, packed 317 mm | 12.480 in
Length, packed 2820 mm | 111.024 in
Weight, gross 54 kg | 119.049 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification