Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RRZZV6-65D-R10F

20-port sector antenna, 4x694-960 (R1 & R2), 4x1427-2690 (Y3 & Y5) and 12 x 1695-2690 MHz (Y1/Y2/Y4/Y6/Y7/Y8), 65° HPBW, 10xRET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in "Cascaded SRET" configuration
  • Supports re-configurable antenna sharing capability enabling control of the internal RET system using up to two separate RET compatible OEM radios
  • Antenna shape optimized for wind load reduction

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 16
RF Connector Quantity, low band 4
RF Connector Quantity, total 20

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (8)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2688 mm | 105.827 in
Net Weight, antenna only 46.1 kg | 101.633 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1427 – 2690 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 R1,R2 Y1,Y2,Y4,Y6,Y7,Y8 Y1,Y2,Y4,Y6,Y7,Y8 Y1,Y2,Y4,Y6,Y7,Y8 Y1,Y2,Y4,Y6,Y7,Y8 Y3,Y5 Y3,Y5 Y3,Y5 Y3,Y5 Y3,Y5
Frequency Band, MHz 698–806 790–896 890–960 1695–1990 1920–2300 2300–2500 2490–2690 1427–1518 1695–1990 1920–2300 2300–2500 2490–2690
RF Port 1,2,3,4 1,2,3,4 1,2,3,4 9 to 20 9 to 20 9 to 20 9 to 20 5,6,7,8 5,6,7,8 5,6,7,8 5,6,7,8 5,6,7,8
Gain at Mid Tilt, dBi 16.2 16.3 16.3 16.4 17.3 17.9 18.1 15.3 16.7 17.4 18.0 17.9
Beamwidth, Horizontal, degrees 67 62 63 70 62 56 56 66 62 55 52 53
Beamwidth, Vertical, degrees 8.5 7.6 7 7.3 6.5 5.7 5.3 9.2 7.5 6.8 6 5.5
Beam Tilt, degrees 2–13 2–13 2–13 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 19 20 24 16 17 20 21 17 16 16 16 17
Front-to-Back Ratio at 180°, dB 35 31 31 34 33 31 31 34 38 37 34 34
Front-to-Back Total Power at 180° ± 30°, dB 23 22 22 29 28 27 27 28 32 31 29 28
CPR at Boresight, dB 31 24 24 23 22 20 20 22 21 21 25 22
CPR at Sector, dB 10 7 8 8 6 6 4 9 8 5 6 2
Isolation, Cross Polarization, dB 28 28 28 25 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 25 25 25 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 250 250 250 200 200 200 200 200 200 200 200 200

Mechanical Specifications

Wind Loading @ Velocity, frontal 914.0 N @ 150 km/h (205.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 239.0 N @ 150 km/h (53.7 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,215.0 N @ 150 km/h (273.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 629.0 N @ 150 km/h (141.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 318 mm | 12.520 in
Length, packed 2809 mm | 110.591 in

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 16
RF Connector Quantity, low band 4
RF Connector Quantity, total 20

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (8)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2688 mm | 105.827 in
Net Weight, antenna only 46.1 kg | 101.633 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1427 – 2690 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 R1,R2 Y1,Y2,Y4,Y6,Y7,Y8 Y1,Y2,Y4,Y6,Y7,Y8 Y1,Y2,Y4,Y6,Y7,Y8 Y1,Y2,Y4,Y6,Y7,Y8 Y3,Y5 Y3,Y5 Y3,Y5 Y3,Y5 Y3,Y5
Frequency Band, MHz 698–806 790–896 890–960 1695–1990 1920–2300 2300–2500 2490–2690 1427–1518 1695–1990 1920–2300 2300–2500 2490–2690
RF Port 1,2,3,4 1,2,3,4 1,2,3,4 9 to 20 9 to 20 9 to 20 9 to 20 5,6,7,8 5,6,7,8 5,6,7,8 5,6,7,8 5,6,7,8
Gain at Mid Tilt, dBi 16.2 16.3 16.3 16.4 17.3 17.9 18.1 15.3 16.7 17.4 18.0 17.9
Beamwidth, Horizontal, degrees 67 62 63 70 62 56 56 66 62 55 52 53
Beamwidth, Vertical, degrees 8.5 7.6 7 7.3 6.5 5.7 5.3 9.2 7.5 6.8 6 5.5
Beam Tilt, degrees 2–13 2–13 2–13 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 19 20 24 16 17 20 21 17 16 16 16 17
Front-to-Back Ratio at 180°, dB 35 31 31 34 33 31 31 34 38 37 34 34
Front-to-Back Total Power at 180° ± 30°, dB 23 22 22 29 28 27 27 28 32 31 29 28
CPR at Boresight, dB 31 24 24 23 22 20 20 22 21 21 25 22
CPR at Sector, dB 10 7 8 8 6 6 4 9 8 5 6 2
Isolation, Cross Polarization, dB 28 28 28 25 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 25 25 25 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 250 250 250 200 200 200 200 200 200 200 200 200

Mechanical Specifications

Wind Loading @ Velocity, frontal 914.0 N @ 150 km/h (205.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 239.0 N @ 150 km/h (53.7 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,215.0 N @ 150 km/h (273.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 629.0 N @ 150 km/h (141.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 318 mm | 12.520 in
Length, packed 2809 mm | 110.591 in
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification