0 Alternative products available

APS-XT

Antenna Orientation and Location Sensing System

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Download

Features and Benefits

Available as a retrofit to site-installed CommScope and Third Party antennas
Monitors Azimuth, Tilt, Roll, Latitude, Longitude and Elevation
Works with AISG 2.1 controllers as an Alignment Sensor Device and Geographic Location Sensor
Works with AISG 2.0 controllers in RET emulation mode
Verify Installations
Long Term Monitoring

Specifications

Product Classification

Product Type

RET actuator

AISG Input Connector	8-pin DIN Male
AISG Input Connector Quantity	1
AISG Output Connector	8-pin DIN Female
AISG Output Connector Quantity	1
Azimuth Note	Accuracy may be affected by installation environment and satellite visibility
Azimuth, nominal	±2.5°
Color	Gray
Elevation	±5 m
Latitude	±5 m
Longitude	±5 m
Roll	±1°
Tilt	±1°

Input Voltage	10–30 Vdc
Boot Time	15 s
Boot Time Note	Exceeds AISG 2.0 and 2.1 requirements
Electromagnetic Compatibility (EMC)	CFR 47 Part 15, Subpart B, Class A \| EN 55022 \| EN 55032 \| EN 61000-4-2 \| EN 61000-4-3 \| EN 61000-4-4 \| EN 61000-4-6
Interface Protocol Signal	RS-485
Lightning Surge Capability Test Method	IEC 61000-4-5
Lightning Surge Capability Waveform	1.2/50 voltage and 8/20 current combination waveform
Lightning Surge Test Mode	Common mode
Power Consumption, maximum	3 W
Power Supply	AISG (compliant with AISG 2.1 ASD and GLS, exceeds AISG 2.0 RET)
Protocol	3GPP/AISG 2.0 compliant

Material Type

ASA

Operating Temperature	-40 °C to +70 °C (-40 °F to +158 °F)
Relative Humidity	Up to 95%, non-condensing
Climatic Sequence Test Method	IEC 60068-2-14
Cold Exposure Test Method	IEC 60068-2-1
Corrosion Test Method	IEC 60068-2-11, Test Condition Ka \| IEC 60068-2-52, Test Condition Kb
Damp Heat Exposure Test Method	IEC 60068-2-30, Test Condition Db
Heat Exposure Test Method	IEC 60068-2-2
Ingress Protection Test Method	IEC 60529:2001, IP56
Packaged Product Shock Test Method	ASTM D4169 \| GR-63-CORE, Section 4.1.1
Rain Simulation Test Method	IEC 60068-2-18, Test Condition Ra, Method 1
UV Resistance Test Method	IEC 60068-2-5, Test Condition B
Vibration Test Method	ASTM D4169 \| IEC 60068-2-6

Weight, net

1.5 kg | 3.307 lb

Agency	Classification
CE	Compliant with the relevant CE product directives
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
UK-ROHS	Compliant

Product Type

RET actuator

AISG Input Connector	8-pin DIN Male
AISG Input Connector Quantity	1
AISG Output Connector	8-pin DIN Female
AISG Output Connector Quantity	1
Azimuth Note	Accuracy may be affected by installation environment and satellite visibility
Azimuth, nominal	±2.5°
Color	Gray
Elevation	±5 m
Latitude	±5 m
Longitude	±5 m
Roll	±1°
Tilt	±1°

Input Voltage	10–30 Vdc
Boot Time	15 s
Boot Time Note	Exceeds AISG 2.0 and 2.1 requirements
Electromagnetic Compatibility (EMC)	CFR 47 Part 15, Subpart B, Class A \| EN 55022 \| EN 55032 \| EN 61000-4-2 \| EN 61000-4-3 \| EN 61000-4-4 \| EN 61000-4-6
Interface Protocol Signal	RS-485
Lightning Surge Capability Test Method	IEC 61000-4-5
Lightning Surge Capability Waveform	1.2/50 voltage and 8/20 current combination waveform
Lightning Surge Test Mode	Common mode
Power Consumption, maximum	3 W
Power Supply	AISG (compliant with AISG 2.1 ASD and GLS, exceeds AISG 2.0 RET)
Protocol	3GPP/AISG 2.0 compliant

Material Type

ASA

Operating Temperature	-40 °C to +70 °C (-40 °F to +158 °F)
Relative Humidity	Up to 95%, non-condensing
Climatic Sequence Test Method	IEC 60068-2-14
Cold Exposure Test Method	IEC 60068-2-1
Corrosion Test Method	IEC 60068-2-11, Test Condition Ka \| IEC 60068-2-52, Test Condition Kb
Damp Heat Exposure Test Method	IEC 60068-2-30, Test Condition Db
Heat Exposure Test Method	IEC 60068-2-2
Ingress Protection Test Method	IEC 60529:2001, IP56
Packaged Product Shock Test Method	ASTM D4169 \| GR-63-CORE, Section 4.1.1
Rain Simulation Test Method	IEC 60068-2-18, Test Condition Ra, Method 1
UV Resistance Test Method	IEC 60068-2-5, Test Condition B
Vibration Test Method	ASTM D4169 \| IEC 60068-2-6

Weight, net

1.5 kg | 3.307 lb

Agency	Classification
CE	Compliant with the relevant CE product directives
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
UK-ROHS	Compliant