NNHH-45A-R4
8-port sector antenna, 4x 698–896 and 4x 1695–2360 MHz, 45° HPBW, 4x RET
Features and Benefits
- Interleaved dipole technology providing for attractive, low wind load mechanical package
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 4 |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 8 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v2 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (2) | Low band (2) |
| Power Consumption, active state, maximum | 10 W |
| Power Consumption, idle state, maximum | 2 W |
| Protocol | 3GPP/AISG 2.0 |
Dimensions
| Width | 457 mm | 17.992 in |
| Depth | 178 mm | 7.008 in |
| Length | 1399 mm | 55.079 in |
| Net Weight, antenna only | 26 kg | 57.320 lb |
| TDD Column Spacing | 210 mm | 8.268 in |
Array Layout
| Click on image to enlarge. |
Port Configuration
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 896 MHz | 1695 – 2360 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 1,000 W |
Electrical Specifications
| R1,R2 | R1,R2 | Y1,Y2 | Y1,Y2 | Y1,Y2 | Y1,Y2 | |
| Frequency Band, MHz | 698–806 | 806–896 | 1695–1880 | 1850–1990 | 1920–2180 | 2300–2360 |
| RF Port | 1-4 | 1-4 | 5-8 | 5-8 | 5-8 | 5-8 |
| Gain, dBi | 12.7 | 13.4 | 17.4 | 18.0 | 18.6 | 19.0 |
| Gain at Mid Tilt, dBi | 12.2 | 13.2 | 17.0 | 17.8 | 18.4 | 18.9 |
| Beamwidth, Horizontal, degrees | 48 | 43 | 45 | 43 | 41 | 38 |
| Beamwidth, Vertical, degrees | 35.6 | 30.5 | 8.3 | 7.7 | 7.3 | 6.5 |
| Beam Tilt, degrees | 2–18 | 2–18 | 2–12 | 2–12 | 2–12 | 2–12 |
| USLS (First Lobe), dB | 20 | 19 | 20 | 21 | 21 | 21 |
| Front-to-Back Ratio at 180°, dB | 29 | 32 | 36 | 36 | 38 | 37 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 25 | 25 | 25 | 25 | 25 | 25 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 | -150 | -150 |
| Input Power per Port at 50°C, maximum, watts | 300 | 300 | 250 | 250 | 250 | 200 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 698–806 | 806–896 | 1695–1880 | 1850–1990 | 1920–2180 | 2300–2360 |
| Gain by all Beam Tilts, average, dBi | 12.2 | 13.2 | 16.9 | 17.7 | 18.2 | 18.7 |
| Gain by all Beam Tilts Tolerance, dB | ±0.6 | ±0.4 | ±0.8 | ±0.5 | ±0.6 | ±0.5 |
| Gain by Beam Tilt, average, dBi | 2 ° | 12.310 ° | 12.2 18 ° | 12.1 | 2 ° | 13.310 ° | 13.2 18 ° | 13.0 | 2 ° | 17.1 7 ° | 17.012 ° | 16.5 | 2 ° | 17.8 7 ° | 17.812 ° | 17.4 | 2 ° | 18.3 7 ° | 18.412 ° | 17.9 | 2 ° | 18.9 7 ° | 18.912 ° | 18.2 |
| Beamwidth, Horizontal Tolerance, degrees | ±2 | ±2 | ±5 | ±3 | ±2 | ±2 |
| Beamwidth, Vertical Tolerance, degrees | ±2.2 | ±2.4 | ±0.5 | ±0.3 | ±0.4 | ±0.2 |
| USLS, beampeak to 20° above beampeak, dB | 14 | 16 | 17 | 15 | ||
| Front-to-Back Total Power at 180° ± 30°, dB | 22 | 24 | 28 | 30 | 30 | 30 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 788.0 N @ 150 km/h (177.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 159.0 N @ 150 km/h (35.7 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 788.0 N @ 150 km/h (177.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 692.0 N @ 150 km/h (155.6 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 563 mm | 22.165 in |
| Depth, packed | 355 mm | 13.976 in |
| Length, packed | 1572 mm | 61.890 in |
| Weight, gross | 35.2 kg | 77.603 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant, Compliant/Exempted |
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 4 |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 8 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v2 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (2) | Low band (2) |
| Power Consumption, active state, maximum | 10 W |
| Power Consumption, idle state, maximum | 2 W |
| Protocol | 3GPP/AISG 2.0 |
Dimensions
| Width | 457 mm | 17.992 in |
| Depth | 178 mm | 7.008 in |
| Length | 1399 mm | 55.079 in |
| Net Weight, antenna only | 26 kg | 57.320 lb |
| TDD Column Spacing | 210 mm | 8.268 in |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 896 MHz | 1695 – 2360 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 1,000 W |
Electrical Specifications
| R1,R2 | R1,R2 | Y1,Y2 | Y1,Y2 | Y1,Y2 | Y1,Y2 | |
| Frequency Band, MHz | 698–806 | 806–896 | 1695–1880 | 1850–1990 | 1920–2180 | 2300–2360 |
| RF Port | 1-4 | 1-4 | 5-8 | 5-8 | 5-8 | 5-8 |
| Gain, dBi | 12.7 | 13.4 | 17.4 | 18.0 | 18.6 | 19.0 |
| Gain at Mid Tilt, dBi | 12.2 | 13.2 | 17.0 | 17.8 | 18.4 | 18.9 |
| Beamwidth, Horizontal, degrees | 48 | 43 | 45 | 43 | 41 | 38 |
| Beamwidth, Vertical, degrees | 35.6 | 30.5 | 8.3 | 7.7 | 7.3 | 6.5 |
| Beam Tilt, degrees | 2–18 | 2–18 | 2–12 | 2–12 | 2–12 | 2–12 |
| USLS (First Lobe), dB | 20 | 19 | 20 | 21 | 21 | 21 |
| Front-to-Back Ratio at 180°, dB | 29 | 32 | 36 | 36 | 38 | 37 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 25 | 25 | 25 | 25 | 25 | 25 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 | -150 | -150 |
| Input Power per Port at 50°C, maximum, watts | 300 | 300 | 250 | 250 | 250 | 200 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 698–806 | 806–896 | 1695–1880 | 1850–1990 | 1920–2180 | 2300–2360 |
| Gain by all Beam Tilts, average, dBi | 12.2 | 13.2 | 16.9 | 17.7 | 18.2 | 18.7 |
| Gain by all Beam Tilts Tolerance, dB | ±0.6 | ±0.4 | ±0.8 | ±0.5 | ±0.6 | ±0.5 |
| Gain by Beam Tilt, average, dBi | 2 ° | 12.3;10 ° | 12.2; 18 ° | 12.1 | 2 ° | 13.3;10 ° | 13.2; 18 ° | 13.0 | 2 ° | 17.1; 7 ° | 17.0;12 ° | 16.5 | 2 ° | 17.8; 7 ° | 17.8;12 ° | 17.4 | 2 ° | 18.3; 7 ° | 18.4;12 ° | 17.9 | 2 ° | 18.9; 7 ° | 18.9;12 ° | 18.2 |
| Beamwidth, Horizontal Tolerance, degrees | ±2 | ±2 | ±5 | ±3 | ±2 | ±2 |
| Beamwidth, Vertical Tolerance, degrees | ±2.2 | ±2.4 | ±0.5 | ±0.3 | ±0.4 | ±0.2 |
| USLS, beampeak to 20° above beampeak, dB | 14 | 16 | 17 | 15 | ||
| Front-to-Back Total Power at 180° ± 30°, dB | 22 | 24 | 28 | 30 | 30 | 30 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 788.0 N @ 150 km/h (177.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 159.0 N @ 150 km/h (35.7 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 788.0 N @ 150 km/h (177.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 692.0 N @ 150 km/h (155.6 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 563 mm | 22.165 in |
| Depth, packed | 355 mm | 13.976 in |
| Length, packed | 1572 mm | 61.890 in |
| Weight, gross | 35.2 kg | 77.603 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
|
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant, Compliant/Exempted |
Documentation & Downloads
Assembly Drawing
Installation Instruction
Product Information
Product Specification
Warranty
Assembly Drawing
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Structural Support, Tools & Accessories
-
![]()
BSAMNT-2F Mounting bracket for cylindrical pipe installations (60-115mm pipe diameter) for fix mechanical tilt applications.
Included Products
Structural Support, Tools & Accessories
-
![]()
BSAMNT-2F Mounting bracket for cylindrical pipe installations (60-115mm pipe diameter) for fix mechanical tilt applications.
Other Ways to Browse
