Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RV2V-6533D-R4

8-port sector/multibeam antenna, 2x 694–960 MHz 65° HPBW,2x1695-2690MHZ 65° and 4x 1710–2690 MHz 4x 33°HPBW, 4x RET with tilt indicators

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector
  • All Internal RET actuators are connected in "Cascaded SRET" configuration

General Specifications

Antenna Type Multibeam
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 6
RF Connector Quantity, low band 2
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1) | Mid band (3)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 350 mm | 13.780 in
Depth 208 mm | 8.189 in
Length 2688 mm | 105.827 in
Net Weight, antenna only 31.6 kg | 69.666 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz | 1710 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,000 W

Electrical Specifications

R1 R1 R1 Y1-Y2 Y1-Y2 Y1-Y2 Y1-Y2 Y1-Y2 Y3 Y3 Y3 Y3
Frequency Band, MHz 694–790 790–890 880–960 1710–1880 1850–1990 1920–2170 2300–2400 2490–2690 1695–1880 1920–2170 2300–2400 2490–2690
RF Port 1,2 1,2 1,2 3-6 3-6 3-6 3-6 3-6 7,8 7,8 7,8 7,8
Beamwidth, Horizontal, degrees 71 69 67 35 33 31 27 25 58 60 63 65
Beamwidth, Vertical, degrees 8.9 7.9 7.3 7.3 6.8 6.5 5.8 5.3 7 6.2 5.5 5.2
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 16 16 20 19 20 19 18 19 20 20 16
Front-to-Back Ratio at 180°, dB 30 33 34 31 35 37 36 33 33 38 38 35
Isolation, Cross Polarization, dB 28 28 28 25 25 25 25 25 27 27 27 27
Isolation, Inter-band, dB 28 28 28 27 27 27 27 27 27 27 27 27
Isolation, Beam to Beam, dB 17 17 17 17 17
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 250 250 250 250 250 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 477.0 N @ 150 km/h (107.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 409.0 N @ 150 km/h (91.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,010.0 N @ 150 km/h (227.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 506.0 N @ 150 km/h (113.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 456 mm | 17.953 in
Depth, packed 357 mm | 14.055 in
Length, packed 2834 mm | 111.575 in
Weight, gross 45 kg | 99.208 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Multibeam
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 6
RF Connector Quantity, low band 2
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1) | Mid band (3)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 350 mm | 13.780 in
Depth 208 mm | 8.189 in
Length 2688 mm | 105.827 in
Net Weight, antenna only 31.6 kg | 69.666 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz | 1710 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,000 W

Electrical Specifications

R1 R1 R1 Y1-Y2 Y1-Y2 Y1-Y2 Y1-Y2 Y1-Y2 Y3 Y3 Y3 Y3
Frequency Band, MHz 694–790 790–890 880–960 1710–1880 1850–1990 1920–2170 2300–2400 2490–2690 1695–1880 1920–2170 2300–2400 2490–2690
RF Port 1,2 1,2 1,2 3-6 3-6 3-6 3-6 3-6 7,8 7,8 7,8 7,8
Beamwidth, Horizontal, degrees 71 69 67 35 33 31 27 25 58 60 63 65
Beamwidth, Vertical, degrees 8.9 7.9 7.3 7.3 6.8 6.5 5.8 5.3 7 6.2 5.5 5.2
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 16 16 20 19 20 19 18 19 20 20 16
Front-to-Back Ratio at 180°, dB 30 33 34 31 35 37 36 33 33 38 38 35
Isolation, Cross Polarization, dB 28 28 28 25 25 25 25 25 27 27 27 27
Isolation, Inter-band, dB 28 28 28 27 27 27 27 27 27 27 27 27
Isolation, Beam to Beam, dB 17 17 17 17 17
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 250 250 250 250 250 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 477.0 N @ 150 km/h (107.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 409.0 N @ 150 km/h (91.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,010.0 N @ 150 km/h (227.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 506.0 N @ 150 km/h (113.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 456 mm | 17.953 in
Depth, packed 357 mm | 14.055 in
Length, packed 2834 mm | 111.575 in
Weight, gross 45 kg | 99.208 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification