RVVPX310R-V
6-port sector antenna, 2x 698–960 and 4x 1710–2690 MHz, 65° HPBW, 3x RET with manual override. Bands cascaded SRET.
Specifications
Features and Benefits
- Integrated Internal Remote Electrical Tilt (RET), with independent control of electrical tilt with manual override on all arrays
- All Internal RET actuators are connected in “Cascaded SRET” configuration
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | ASA, UV stabilized |
| Radiator Material | Aluminum | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 4 |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 6 |
Remote Electrical Tilt (RET) Information
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (2) | Low band (1) |
| Power Consumption, idle state, maximum | 2 W |
| Power Consumption, normal conditions, maximum | 13 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 296 mm | 11.654 in |
| Depth | 244 mm | 9.606 in |
| Length | 2490 mm | 98.032 in |
| Net Weight, without mounting kit | 29 kg | 63.934 lb |
Array Layout
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 960 MHz | 1710 – 2690 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 698–790 | 790–890 | 890–960 | 1710–1920 | 1920–2170 | 2300–2690 |
| Gain, dBi | 15.2 | 16.0 | 16.5 | 16.0 | 17.0 | 17.4 |
| Beamwidth, Horizontal, degrees | 71 | 68 | 62 | 67 | 61 | 59 |
| Beamwidth, Vertical, degrees | 9.9 | 8.8 | 7.8 | 8.5 | 7.4 | 6 |
| Beam Tilt, degrees | 0–10 | 0–10 | 0–10 | 0–10 | 0–10 | 0–10 |
| USLS (First Lobe), dB | 18 | 16 | 16 | 18 | 18 | 18 |
| Null Fill, dB | -22 | -22 | -22 | -22 | -22 | -22 |
| Front-to-Back Ratio at 180°, dB | 35 | 35 | 31 | 31 | 34 | 34 |
| CPR at Boresight, dB | 14 | 17 | 16 | 17 | 20 | 13 |
| CPR at Sector, dB | 10 | 14 | 10 | 15 | 10 | 1 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.43 | 15.0 | 1.43 | 15.0 | 1.43 | 15.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 | -150 | -150 |
| Input Power per Port, maximum, watts | 300 | 300 | 300 | 250 | 250 | 250 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 698–790 | 790–890 | 890–960 | 1710–1920 | 1920–2170 | 2300–2690 |
| Gain by all Beam Tilts, average, dBi | 15.1 | 15.8 | 16.1 | 15.8 | 16.9 | 17.2 |
| Gain by all Beam Tilts Tolerance, dB | ±0.7 | ±0.5 | ±0.4 | ±0.8 | ±0.8 | ±0.9 |
| Gain by Beam Tilt, average, dBi | 0 ° | 14.9 5 ° | 15.2 10 ° | 15.3 | 0 ° | 15.6 5 ° | 15.9 10 ° | 15.9 | 0 ° | 16.0 5 ° | 16.2 10 ° | 16.2 | 0 ° | 15.9 5 ° | 15.8 10 ° | 15.8 | 0 ° | 17.0 5 ° | 16.9 10 ° | 16.7 | 0 ° | 17.3 5 ° | 17.3 10 ° | 17.1 |
| Beamwidth, Horizontal Tolerance, degrees | ±1.3 | ±2.4 | ±2.4 | ±3.9 | ±4.1 | ±5.5 |
| Beamwidth, Vertical Tolerance, degrees | ±0.7 | ±0.5 | ±0.2 | ±0.8 | ±0.6 | ±0.6 |
| USLS, beampeak to 20° above beampeak, dB | 18 | 17 | 17 | 18 | 18 | 18 |
| Front-to-Back Total Power at 180° ± 30°, dB | 27 | 27 | 22 | 30 | 31 | 33 |
| CPR at Boresight, dB | 15 | 18 | 16 | 17 | 20 | 14 |
| CPR at Sector, dB | 10 | 14 | 9 | 15 | 11 | 1 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 844.0 N @ 150 km/h (189.7 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 605.0 N @ 150 km/h (136.0 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 937.0 N @ 150 km/h (210.6 lbf @ 150 km/h) |
| Wind Speed, maximum | 250 km/h (155 mph) |
Packaging and Weights
| Width, packed | 374 mm | 14.724 in |
| Depth, packed | 363 mm | 14.291 in |
| Length, packed | 2677 mm | 105.394 in |
| Weight, gross | 54 kg | 119.049 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
CHINA-ROHS
|
Above maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant/Exempted |
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | ASA, UV stabilized |
| Radiator Material | Aluminum | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 4 |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 6 |
Remote Electrical Tilt (RET) Information
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (2) | Low band (1) |
| Power Consumption, idle state, maximum | 2 W |
| Power Consumption, normal conditions, maximum | 13 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 296 mm | 11.654 in |
| Depth | 244 mm | 9.606 in |
| Length | 2490 mm | 98.032 in |
| Net Weight, without mounting kit | 29 kg | 63.934 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 960 MHz | 1710 – 2690 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 698–790 | 790–890 | 890–960 | 1710–1920 | 1920–2170 | 2300–2690 |
| Gain, dBi | 15.2 | 16.0 | 16.5 | 16.0 | 17.0 | 17.4 |
| Beamwidth, Horizontal, degrees | 71 | 68 | 62 | 67 | 61 | 59 |
| Beamwidth, Vertical, degrees | 9.9 | 8.8 | 7.8 | 8.5 | 7.4 | 6 |
| Beam Tilt, degrees | 0–10 | 0–10 | 0–10 | 0–10 | 0–10 | 0–10 |
| USLS (First Lobe), dB | 18 | 16 | 16 | 18 | 18 | 18 |
| Null Fill, dB | -22 | -22 | -22 | -22 | -22 | -22 |
| Front-to-Back Ratio at 180°, dB | 35 | 35 | 31 | 31 | 34 | 34 |
| CPR at Boresight, dB | 14 | 17 | 16 | 17 | 20 | 13 |
| CPR at Sector, dB | 10 | 14 | 10 | 15 | 10 | 1 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.43 | 15.0 | 1.43 | 15.0 | 1.43 | 15.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 | -150 | -150 |
| Input Power per Port, maximum, watts | 300 | 300 | 300 | 250 | 250 | 250 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 698–790 | 790–890 | 890–960 | 1710–1920 | 1920–2170 | 2300–2690 |
| Gain by all Beam Tilts, average, dBi | 15.1 | 15.8 | 16.1 | 15.8 | 16.9 | 17.2 |
| Gain by all Beam Tilts Tolerance, dB | ±0.7 | ±0.5 | ±0.4 | ±0.8 | ±0.8 | ±0.9 |
| Gain by Beam Tilt, average, dBi | 0 ° | 14.9; 5 ° | 15.2; 10 ° | 15.3 | 0 ° | 15.6; 5 ° | 15.9; 10 ° | 15.9 | 0 ° | 16.0; 5 ° | 16.2; 10 ° | 16.2 | 0 ° | 15.9; 5 ° | 15.8; 10 ° | 15.8 | 0 ° | 17.0; 5 ° | 16.9; 10 ° | 16.7 | 0 ° | 17.3; 5 ° | 17.3; 10 ° | 17.1 |
| Beamwidth, Horizontal Tolerance, degrees | ±1.3 | ±2.4 | ±2.4 | ±3.9 | ±4.1 | ±5.5 |
| Beamwidth, Vertical Tolerance, degrees | ±0.7 | ±0.5 | ±0.2 | ±0.8 | ±0.6 | ±0.6 |
| USLS, beampeak to 20° above beampeak, dB | 18 | 17 | 17 | 18 | 18 | 18 |
| Front-to-Back Total Power at 180° ± 30°, dB | 27 | 27 | 22 | 30 | 31 | 33 |
| CPR at Boresight, dB | 15 | 18 | 16 | 17 | 20 | 14 |
| CPR at Sector, dB | 10 | 14 | 9 | 15 | 11 | 1 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 844.0 N @ 150 km/h (189.7 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 605.0 N @ 150 km/h (136.0 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 937.0 N @ 150 km/h (210.6 lbf @ 150 km/h) |
| Wind Speed, maximum | 250 km/h (155 mph) |
Packaging and Weights
| Width, packed | 374 mm | 14.724 in |
| Depth, packed | 363 mm | 14.291 in |
| Length, packed | 2677 mm | 105.394 in |
| Weight, gross | 54 kg | 119.049 lb |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
|
CHINA-ROHS
|
Above maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant/Exempted |
Documentation & Downloads
Assembly Drawing
Installation Instruction
Product Information
Product Specification
Warranty
Assembly Drawing
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Antennas
-
![]()
T-029-GL-E Adjustable Tilt Pipe Mounting Kit for 2.362"-4.5" (60-115mm) OD round members for panel antennas. Includes 2 clamp sets.
Structural Support, Tools & Accessories
-
![]()
T-029-GL-E Adjustable Tilt Pipe Mounting Kit for 2.362"-4.5" (60-115mm) OD round members for panel antennas. Includes 2 clamp sets.
-
![]()
T-029-GL-E Adjustable Tilt Pipe Mounting Kit for 2.362"-4.5" (60-115mm) OD round members for panel antennas. Includes 2 clamp sets.
Related Products
Antennas
-
![]()
APS-XT Antenna Orientation and Location Sensing System
Included Products
Antennas
-
![]()
T-029-GL-E Adjustable Tilt Pipe Mounting Kit for 2.362"-4.5" (60-115mm) OD round members for panel antennas. Includes 2 clamp sets.
Structural Support, Tools & Accessories
-
![]()
T-029-GL-E Adjustable Tilt Pipe Mounting Kit for 2.362"-4.5" (60-115mm) OD round members for panel antennas. Includes 2 clamp sets.
-
![]()
T-029-GL-E Adjustable Tilt Pipe Mounting Kit for 2.362"-4.5" (60-115mm) OD round members for panel antennas. Includes 2 clamp sets.
Related Products
Antennas
-
![]()
APS-XT Antenna Orientation and Location Sensing System
Other Ways to Browse
