Warning Icon
This product was discontinued on: March 31, 2021

For other alternatives, please contact us for more information.

1 Replacement products available
  • T4-90A-R1-V2
    Planar Array Antenna, 2300–2690 MHz, 90° HPBW, 1xIntRET

T4-90A-R1

Planar Array Antenna, 2300–2690 MHz, 90° HPBW, 1xIntRET

Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • For use in beamforming system, includes a calibration port
  • Planar array antenna – 4 columns
  • Single internal RET control for all four antenna arrays

General Specifications

Antenna Type Sector
Band Single band
Calibration Connector Interface N Female
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Radiator Material Low loss circuit board
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal Bias Tee Cal Port
Internal RET High band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 307 mm | 12.087 in
Depth 118 mm | 4.646 in
Length 1610 mm | 63.386 in
Net Weight, without mounting kit 15.6 kg | 34.392 lb
TDD Column Spacing 58 mm | 2.283 in

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 2300 – 2690 MHz
Polarization ±45°

Beam Forming Weights

Click on image to enlarge.

Electrical Specifications

Frequency Band, MHz 2300–2400 2496–2690
Beam Tilt, degrees 2–12 2–12
Beam Tilt Tolerance, degrees ±0.9 ±0.9
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 18 18
Isolation, Cross Polarization, port to port, dB 24 24
Isolation, Cross Polarization, port to port, between two columns, dB 24 24
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port, maximum, watts 250 250

Electrical Specifications, Broadcast 65

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 18.0 18.6
Beamwidth, Horizontal, degrees 70 67
Beamwidth, Horizontal Tolerance, degrees ±7.2 ±5.9
Beamwidth, Vertical, degrees 5.1 4.8
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.4
CPR at Boresight, dB 20 17
Null Fill, dB 30 30

Electrical Specifications, Service Beam

Frequency Band, MHz 2300–2400 2496–2690
Steered 0° Gain, dBi 22.2 22.3
Steered 0° Gain Tolerance, dBi ±0.5 ±0.8
Steered 0° Beamwidth, Horizontal, degrees 27 26
Steered 0° CPR at Beampeak, dB 21 16
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 33 33
Steered 30° Gain, dBi 21.6 21.6
Steered 30° Gain Tolerance, dBi ±0.6 ±0.9
Steered 30° CPR at Beampeak, dB 21 16
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 31 31

Electrical Specifications, Single Column

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 16.8 16.9
Beamwidth, Horizontal, degrees 99 95
Beamwidth, Horizontal Tolerance, degrees ±16.2 ±14.3
Beamwidth, Vertical, degrees 5.1 4.8
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.4
CPR at Sector, dB 11 7
Input Power per Port, maximum, watts 250 250

Mechanical Specifications

Mechanical Tilt Range 0°–17°
Wind Loading @ Velocity, frontal 586.0 N @ 150 km/h (131.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 123.0 N @ 150 km/h (27.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 709.0 N @ 150 km/h (159.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 413 mm | 16.26 in
Depth, packed 257 mm | 10.118 in
Length, packed 1740 mm | 68.504 in
Weight, gross 25.5 kg | 56.218 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector
Band Single band
Calibration Connector Interface N Female
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Radiator Material Low loss circuit board
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal Bias Tee Cal Port
Internal RET High band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 307 mm | 12.087 in
Depth 118 mm | 4.646 in
Length 1610 mm | 63.386 in
Net Weight, without mounting kit 15.6 kg | 34.392 lb
TDD Column Spacing 58 mm | 2.283 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 2300 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 2300–2400 2496–2690
Beam Tilt, degrees 2–12 2–12
Beam Tilt Tolerance, degrees ±0.9 ±0.9
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 18 18
Isolation, Cross Polarization, port to port, dB 24 24
Isolation, Cross Polarization, port to port, between two columns, dB 24 24
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port, maximum, watts 250 250

Electrical Specifications, Broadcast 65

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 18.0 18.6
Beamwidth, Horizontal, degrees 70 67
Beamwidth, Horizontal Tolerance, degrees ±7.2 ±5.9
Beamwidth, Vertical, degrees 5.1 4.8
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.4
CPR at Boresight, dB 20 17
Null Fill, dB 30 30

Electrical Specifications, Service Beam

Frequency Band, MHz 2300–2400 2496–2690
Steered 0° Gain, dBi 22.2 22.3
Steered 0° Gain Tolerance, dBi ±0.5 ±0.8
Steered 0° Beamwidth, Horizontal, degrees 27 26
Steered 0° CPR at Beampeak, dB 21 16
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 33 33
Steered 30° Gain, dBi 21.6 21.6
Steered 30° Gain Tolerance, dBi ±0.6 ±0.9
Steered 30° CPR at Beampeak, dB 21 16
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 31 31

Electrical Specifications, Single Column

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 16.8 16.9
Beamwidth, Horizontal, degrees 99 95
Beamwidth, Horizontal Tolerance, degrees ±16.2 ±14.3
Beamwidth, Vertical, degrees 5.1 4.8
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.4
CPR at Sector, dB 11 7
Input Power per Port, maximum, watts 250 250

Mechanical Specifications

Mechanical Tilt Range 0°–17°
Wind Loading @ Velocity, frontal 586.0 N @ 150 km/h (131.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 123.0 N @ 150 km/h (27.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 709.0 N @ 150 km/h (159.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 413 mm | 16.26 in
Depth, packed 257 mm | 10.118 in
Length, packed 1740 mm | 68.504 in
Weight, gross 25.5 kg | 56.218 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification