Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

V360QS-C3-3XR

2-port small cell antenna, 2x 1695–2690 MHz, 360° HPBW, 1x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Provides a future-ready antenna solution with flexibility to reassign antenna, for example GSM 1800 service to 2.6GHz LTE at a later date
  • Employs state-of-the-art ultra wideband technology providing excellent RF performance in all bands
  • Excellent RF pattern control over the full operating band and tilt range for desired coverage and interference containment
  • Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

General Specifications

Antenna Type Small Cell
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Male
RET Interface, quantity 1 male
Input Voltage 10–30 Vdc
Internal RET High band (3)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Length 596 mm | 23.465 in
Net Weight, without mounting kit 7.3 kg | 16.094 lb
Outer Diameter 200 mm | 7.874 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain, dBi 8.9 9.5 9.6 10.1 10.2
Beamwidth, Horizontal, degrees 360 360 360 360 360
Beamwidth, Vertical, degrees 18.4 17.2 16.1 14.4 13.1
Beam Tilt, degrees 0–20 0–20 0–20 0–20 0–20
USLS (First Lobe), dB 16 16 15 15 15
Isolation, Cross Polarization, dB 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -150 -150
Input Power per Port, maximum, watts 100 100 100 100 100

Mechanical Specifications

Wind Loading @ Velocity, frontal 58.0 N @ 150 km/h (13.0 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 58.0 N @ 150 km/h (13.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 58.0 N @ 150 km/h (13.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 320 mm | 12.598 in
Depth, packed 300 mm | 11.811 in
Length, packed 850 mm | 33.465 in
Weight, gross 10.1 kg | 22.267 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Small Cell
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Male
RET Interface, quantity 1 male
Input Voltage 10–30 Vdc
Internal RET High band (3)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Length 596 mm | 23.465 in
Net Weight, without mounting kit 7.3 kg | 16.094 lb
Outer Diameter 200 mm | 7.874 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain, dBi 8.9 9.5 9.6 10.1 10.2
Beamwidth, Horizontal, degrees 360 360 360 360 360
Beamwidth, Vertical, degrees 18.4 17.2 16.1 14.4 13.1
Beam Tilt, degrees 0–20 0–20 0–20 0–20 0–20
USLS (First Lobe), dB 16 16 15 15 15
Isolation, Cross Polarization, dB 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -150 -150
Input Power per Port, maximum, watts 100 100 100 100 100

Mechanical Specifications

Wind Loading @ Velocity, frontal 58.0 N @ 150 km/h (13.0 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 58.0 N @ 150 km/h (13.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 58.0 N @ 150 km/h (13.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 320 mm | 12.598 in
Depth, packed 300 mm | 11.811 in
Length, packed 850 mm | 33.465 in
Weight, gross 10.1 kg | 22.267 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Assembly Drawing

Installation Instruction

Product Specification

Assembly Drawing

Installation Instruction

Product Specification