V4-65D-M
8-port sector antenna, 8x 1710–2690 MHz, 65° HPBW, manual tilt.
Specifications
Features and Benefits
- Employs state-of-the-art ultra wideband technology providing excellent RF performance in all bands
- Excellent RF pattern control over the full operating band and tilt range for desired coverage and interference containment
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Single band |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 8 |
| RF Connector Quantity, total | 8 |
Dimensions
| Width | 301 mm | 11.85 in |
| Depth | 180 mm | 7.087 in |
| Length | 2645 mm | 104.134 in |
| Net Weight, without mounting kit | 28 kg | 61.729 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 1710 – 2690 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 800 W @ 50 °C |
Electrical Specifications
| Frequency Band, MHz | 1710–1880 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain, dBi | 17.0 | 17.8 | 18.3 | 18.9 |
| Beamwidth, Horizontal, degrees | 70 | 67 | 60 | 54 |
| Beamwidth, Vertical, degrees | 6.9 | 6.3 | 5.5 | 5.2 |
| Beam Tilt, degrees | 0–10 | 0–10 | 0–10 | 0–10 |
| USLS (First Lobe), dB | 16 | 17 | 20 | 20 |
| Front-to-Back Ratio at 180°, dB | 35 | 37 | 40 | 39 |
| Isolation, Cross Polarization, dB | 28 | 28 | 28 | 28 |
| Isolation, Inter-band, dB | 28 | 28 | 28 | 28 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 |
| Input Power per Port at 50°C, maximum, watts | 200 | 200 | 200 | 200 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 1710–1880 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain by all Beam Tilts, average, dBi | 16.8 | 17.4 | 18.1 | 18.5 |
| Gain by all Beam Tilts Tolerance, dB | ±0.3 | ±0.5 | ±0.4 | ±0.6 |
| Gain by Beam Tilt, average, dBi | 0 ° | 16.6 5 ° | 16.6 10 ° | 16.8 | 0 ° | 17.3 5 ° | 17.5 10 ° | 17.3 | 0 ° | 17.8 5 ° | 18.1 10 ° | 18.1 | 0 ° | 18.4 5 ° | 18.7 10 ° | 18.2 |
| Beamwidth, Horizontal Tolerance, degrees | ±2.7 | ±3 | ±4.1 | ±2.8 |
| Beamwidth, Vertical Tolerance, degrees | ±0.5 | ±0.6 | ±0.4 | ±0.4 |
| USLS, beampeak to 20° above beampeak, dB | 15 | 15 | 18 | 18 |
| Front-to-Back Total Power at 180° ± 30°, dB | 25 | 27 | 28 | 27 |
| CPR at Boresight, dB | 15 | 16 | 16 | 15 |
| CPR at Sector, dB | 12 | 12 | 6 | 5 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 433.0 N @ 150 km/h (97.3 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 367.0 N @ 150 km/h (82.5 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 834.0 N @ 150 km/h (187.5 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 439.0 N @ 150 km/h (98.7 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 409 mm | 16.102 in |
| Depth, packed | 309 mm | 12.165 in |
| Length, packed | 2894 mm | 113.937 in |
| Weight, gross | 46.5 kg | 102.515 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
General Specifications
| Antenna Type | Sector |
| Band | Single band |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 8 |
| RF Connector Quantity, total | 8 |
Dimensions
| Width | 301 mm | 11.85 in |
| Depth | 180 mm | 7.087 in |
| Length | 2645 mm | 104.134 in |
| Net Weight, without mounting kit | 28 kg | 61.729 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 1710 – 2690 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 800 W @ 50 °C |
Electrical Specifications
| Frequency Band, MHz | 1710–1880 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain, dBi | 17.0 | 17.8 | 18.3 | 18.9 |
| Beamwidth, Horizontal, degrees | 70 | 67 | 60 | 54 |
| Beamwidth, Vertical, degrees | 6.9 | 6.3 | 5.5 | 5.2 |
| Beam Tilt, degrees | 0–10 | 0–10 | 0–10 | 0–10 |
| USLS (First Lobe), dB | 16 | 17 | 20 | 20 |
| Front-to-Back Ratio at 180°, dB | 35 | 37 | 40 | 39 |
| Isolation, Cross Polarization, dB | 28 | 28 | 28 | 28 |
| Isolation, Inter-band, dB | 28 | 28 | 28 | 28 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 |
| Input Power per Port at 50°C, maximum, watts | 200 | 200 | 200 | 200 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 1710–1880 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain by all Beam Tilts, average, dBi | 16.8 | 17.4 | 18.1 | 18.5 |
| Gain by all Beam Tilts Tolerance, dB | ±0.3 | ±0.5 | ±0.4 | ±0.6 |
| Gain by Beam Tilt, average, dBi | 0 ° | 16.6; 5 ° | 16.6; 10 ° | 16.8 | 0 ° | 17.3; 5 ° | 17.5; 10 ° | 17.3 | 0 ° | 17.8; 5 ° | 18.1; 10 ° | 18.1 | 0 ° | 18.4; 5 ° | 18.7; 10 ° | 18.2 |
| Beamwidth, Horizontal Tolerance, degrees | ±2.7 | ±3 | ±4.1 | ±2.8 |
| Beamwidth, Vertical Tolerance, degrees | ±0.5 | ±0.6 | ±0.4 | ±0.4 |
| USLS, beampeak to 20° above beampeak, dB | 15 | 15 | 18 | 18 |
| Front-to-Back Total Power at 180° ± 30°, dB | 25 | 27 | 28 | 27 |
| CPR at Boresight, dB | 15 | 16 | 16 | 15 |
| CPR at Sector, dB | 12 | 12 | 6 | 5 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 433.0 N @ 150 km/h (97.3 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 367.0 N @ 150 km/h (82.5 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 834.0 N @ 150 km/h (187.5 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 439.0 N @ 150 km/h (98.7 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 409 mm | 16.102 in |
| Depth, packed | 309 mm | 12.165 in |
| Length, packed | 2894 mm | 113.937 in |
| Weight, gross | 46.5 kg | 102.515 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Documentation & Downloads
Installation Instruction
Product Information
Product Specification
Warranty
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
Other Ways to Browse
