Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RRZZ2VV-6533B-R8

16-port sector/multibeam antenna 4x 694–960 MHz, 4x 1427-2690 MHz 65° HPBW and 8x 1710–2690 MHz 2x 2-Beam 33°HPBW, 8x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • GREEN and High Capacity Antenna Solution
  • Enhances network capacity through six sectors on high band while maintaining low band coverage layer through three sectors with only three antenna faces
  • Innovative aerodynamic shape optimized for reduced wind loading in every direction
  • Supports re-configurable antenna sharing capability enabling control of the internal RET system using up to two separate RET compatible OEM radios
  • "Green" packaging of reduced size and gross weight that uses less material and reduces shipping pollution

General Specifications

Antenna Type DualPol® multibeam
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 12
RF Connector Quantity, low band 4
RF Connector Quantity, total 16

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (6) | Low band (2)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2100 mm | 82.677 in
Net Weight, antenna only 46 kg | 101.413 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1427 – 2690 MHz | 1710 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,700 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 R1,R2 Y1,Y6 Y1,Y6 Y1,Y6 Y1,Y6 Y1,Y6 Y2-Y5 Y2-Y5 Y2-Y5 Y2-Y5
Frequency Band, MHz 694–806 790–896 890–960 1427–1518 1695–1990 1920–2300 2300–2500 2490–2690 1710–1990 1920–2300 2300–2500 2490–2690
RF Port 1,2,3,4 1,2,3,4 1,2,3,4 5,6,15,16 5,6,15,16 5,6,15,16 5,6,15,16 5,6,15,16 7,8,9,10,11,12,13,14 7,8,9,10,11,12,13,14 7,8,9,10,11,12,13,14 7,8,9,10,11,12,13,14
Gain at Mid Tilt, dBi 14.3 14.7 14.7 14.4 15.9 16.9 18.0 17.9 16.9 18.1 18.3 18.6
Beam Centers, Horizontal, degrees ±0 ±0 ±0 ±0 ±0 ±0 ±0 ±0 ±27 ±27 ±27 ±27
Beamwidth, Horizontal, degrees 73 66 66 78 76 68 58 56 34 32 28 26
Beamwidth, Vertical, degrees 10.9 9.7 9.1 7.9 6.6 5.9 5.2 4.9 8.3 7.5 6.7 6.2
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 17 17 19 18 19 21 21 16 17 19 18
Front-to-Back Ratio at 180°, dB 27 30 29 33 33 31 34 34 36 36 34 33
Front-to-Back Total Power at 180° ± 30°, dB 22 22 20 22 24 24 26 24 30 29 28 27
CPR at Boresight, dB 20 19 18 21 18 19 22 22 17 21 18 19
CPR at Sector, dB 12 9 9 6 9 4 10 9
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25 25 25 25 25 25
Isolation, Beam to Beam, dB 17 17 17 17
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 300 300 300 200 200 200 200 200 200 200 200 200

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.68 m² | 7.319 ft²
Effective Projective Area (EPA), lateral 0.21 m² | 2.260 ft²
Wind Loading @ Velocity, frontal 714.0 N @ 150 km/h (160.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 187.0 N @ 150 km/h (42.0 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 949.0 N @ 150 km/h (213.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 491.0 N @ 150 km/h (110.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 2287 mm | 90.039 in
Weight, gross 60.4 kg | 133.159 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type DualPol® multibeam
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 12
RF Connector Quantity, low band 4
RF Connector Quantity, total 16

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (6) | Low band (2)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2100 mm | 82.677 in
Net Weight, antenna only 46 kg | 101.413 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1427 – 2690 MHz | 1710 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,700 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 R1,R2 Y1,Y6 Y1,Y6 Y1,Y6 Y1,Y6 Y1,Y6 Y2-Y5 Y2-Y5 Y2-Y5 Y2-Y5
Frequency Band, MHz 694–806 790–896 890–960 1427–1518 1695–1990 1920–2300 2300–2500 2490–2690 1710–1990 1920–2300 2300–2500 2490–2690
RF Port 1,2,3,4 1,2,3,4 1,2,3,4 5,6,15,16 5,6,15,16 5,6,15,16 5,6,15,16 5,6,15,16 7,8,9,10,11,12,13,14 7,8,9,10,11,12,13,14 7,8,9,10,11,12,13,14 7,8,9,10,11,12,13,14
Gain at Mid Tilt, dBi 14.3 14.7 14.7 14.4 15.9 16.9 18.0 17.9 16.9 18.1 18.3 18.6
Beam Centers, Horizontal, degrees ±0 ±0 ±0 ±0 ±0 ±0 ±0 ±0 ±27 ±27 ±27 ±27
Beamwidth, Horizontal, degrees 73 66 66 78 76 68 58 56 34 32 28 26
Beamwidth, Vertical, degrees 10.9 9.7 9.1 7.9 6.6 5.9 5.2 4.9 8.3 7.5 6.7 6.2
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 17 17 19 18 19 21 21 16 17 19 18
Front-to-Back Ratio at 180°, dB 27 30 29 33 33 31 34 34 36 36 34 33
Front-to-Back Total Power at 180° ± 30°, dB 22 22 20 22 24 24 26 24 30 29 28 27
CPR at Boresight, dB 20 19 18 21 18 19 22 22 17 21 18 19
CPR at Sector, dB 12 9 9 6 9 4 10 9
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25 25 25 25 25 25
Isolation, Beam to Beam, dB 17 17 17 17
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 300 300 300 200 200 200 200 200 200 200 200 200

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.68 m² | 7.319 ft²
Effective Projective Area (EPA), lateral 0.21 m² | 2.260 ft²
Wind Loading @ Velocity, frontal 714.0 N @ 150 km/h (160.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 187.0 N @ 150 km/h (42.0 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 949.0 N @ 150 km/h (213.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 491.0 N @ 150 km/h (110.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 2287 mm | 90.039 in
Weight, gross 60.4 kg | 133.159 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification