VV-65A-R2VB-V2
4-port sector antenna, 4x 1695–2690 MHz, 65° HPBW, 2x RET
Features and Benefits
- Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector
- With tilt indicators and integrated internal RET model
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Single band |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, mid band | 4 |
| RF Connector Quantity, total | 4 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v2 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | Mid band (2) |
| Power Consumption, active state, maximum | 10 W |
| Power Consumption, idle state, maximum | 2 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 257 mm | 10.118 in |
| Depth | 87 mm | 3.425 in |
| Length | 1377 mm | 54.213 in |
| Net Weight, without mounting kit | 9.8 kg | 21.605 lb |
Array Layout
| Click on image to enlarge. |
Port Configuration
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 1695 – 2690 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 450 W |
Electrical Specifications
| Frequency Band, MHz | 1695–1880 | 1850–1920 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain, dBi | 17.3 | 17.7 | 18.2 | 18.5 | 18.2 |
| Beamwidth, Horizontal, degrees | 66 | 63 | 62 | 61 | 56 |
| Beamwidth, Vertical, degrees | 7.1 | 6.8 | 6.2 | 5.3 | 5 |
| Beam Tilt, degrees | 0–10 | 0–10 | 0–10 | 0–10 | 0–10 |
| USLS (First Lobe), dB | 20 | 23 | 22 | 16 | 16 |
| Front-to-Back Ratio, Copolarization 180° ± 30°, dB | 30 | 31 | 29 | 29 | 30 |
| Isolation, Cross Polarization, dB | 30 | 30 | 30 | 30 | 30 |
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -153 | -153 | -153 |
| Input Power per Port, maximum, watts | 200 | 200 | 200 | 200 | 200 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 1695–1880 | 1850–1920 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain by all Beam Tilts, average, dBi | 17.0 | 17.5 | 17.9 | 18.2 | 17.9 |
| Gain by all Beam Tilts Tolerance, dB | ±0.7 | ±0.2 | ±0.3 | ±0.5 | ±0.5 |
| Beamwidth, Horizontal Tolerance, degrees | ±3.8 | ±1.2 | ±2.4 | ±3 | ±3.3 |
| Beamwidth, Vertical Tolerance, degrees | ±0.4 | ±0.2 | ±0.4 | ±0.3 | ±0.2 |
| CPR at Boresight, dB | 28 | 27 | 25 | 25 | 25 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 278.0 N @ 150 km/h (62.5 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 75.0 N @ 150 km/h (16.9 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 237.0 N @ 150 km/h (53.3 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 352 mm | 13.858 in |
| Depth, packed | 207 mm | 8.150 in |
| Length, packed | 1557 mm | 61.299 in |
| Weight, gross | 16 kg | 35.274 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
General Specifications
| Antenna Type | Sector |
| Band | Single band |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, mid band | 4 |
| RF Connector Quantity, total | 4 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v2 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | Mid band (2) |
| Power Consumption, active state, maximum | 10 W |
| Power Consumption, idle state, maximum | 2 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 257 mm | 10.118 in |
| Depth | 87 mm | 3.425 in |
| Length | 1377 mm | 54.213 in |
| Net Weight, without mounting kit | 9.8 kg | 21.605 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 1695 – 2690 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 450 W |
Electrical Specifications
| Frequency Band, MHz | 1695–1880 | 1850–1920 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain, dBi | 17.3 | 17.7 | 18.2 | 18.5 | 18.2 |
| Beamwidth, Horizontal, degrees | 66 | 63 | 62 | 61 | 56 |
| Beamwidth, Vertical, degrees | 7.1 | 6.8 | 6.2 | 5.3 | 5 |
| Beam Tilt, degrees | 0–10 | 0–10 | 0–10 | 0–10 | 0–10 |
| USLS (First Lobe), dB | 20 | 23 | 22 | 16 | 16 |
| Front-to-Back Ratio, Copolarization 180° ± 30°, dB | 30 | 31 | 29 | 29 | 30 |
| Isolation, Cross Polarization, dB | 30 | 30 | 30 | 30 | 30 |
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -153 | -153 | -153 |
| Input Power per Port, maximum, watts | 200 | 200 | 200 | 200 | 200 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 1695–1880 | 1850–1920 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain by all Beam Tilts, average, dBi | 17.0 | 17.5 | 17.9 | 18.2 | 17.9 |
| Gain by all Beam Tilts Tolerance, dB | ±0.7 | ±0.2 | ±0.3 | ±0.5 | ±0.5 |
| Beamwidth, Horizontal Tolerance, degrees | ±3.8 | ±1.2 | ±2.4 | ±3 | ±3.3 |
| Beamwidth, Vertical Tolerance, degrees | ±0.4 | ±0.2 | ±0.4 | ±0.3 | ±0.2 |
| CPR at Boresight, dB | 28 | 27 | 25 | 25 | 25 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 278.0 N @ 150 km/h (62.5 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 75.0 N @ 150 km/h (16.9 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 237.0 N @ 150 km/h (53.3 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 352 mm | 13.858 in |
| Depth, packed | 207 mm | 8.150 in |
| Length, packed | 1557 mm | 61.299 in |
| Weight, gross | 16 kg | 35.274 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
|
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
Documentation & Downloads
Assembly Drawing
Product Information
Product Specification
Warranty
Assembly Drawing
Product Compliance Documentation
Product Information
Product Specification
Warranty
Other Ways to Browse
