Warning Icon
This product was discontinued on: March 30, 2024

For other alternatives, please contact us for more information.

1 Replacement products available

TMAT21X23B68-31-43 | E14R00P04

Twin TMA AWS/WCS with 555-894 Bypass, 4.3-10 connectors

Specifications
Finish making your selections or clear them to view relevant specifications.

Product Classification

Product Type Tower mounted amplifier

General Specifications

RF Connector Interface 4.3-10 Female
RF Connector Interface Body Style Long neck

Dimensions

Height 247 mm | 9.724 in
Width 280 mm | 11.024 in
Depth 99 mm | 3.898 in
Ground Screw Diameter 5 mm | 0.197 in

Outline Drawing

Click on image to enlarge.

Electrical Specifications

License Band, Band Pass CEL 850 | USA 700 | USA 750
License Band, LNA AWS 1700 | AWS 2000 | WCS 2300

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy Yes
Lightning Surge Current 10 kA
Lightning Surge Current Waveform 8/20 waveform
Operating Current at Voltage 210 mA @ 12 Vdc
Voltage, CWA Mode 10–18 Vdc
Alarm Current, CWA Mode 150 mA +/- 10 mA (10-18 VDC)

Electrical Specifications, AISG

AISG Carrier 2.176 MHz ± 100 ppm
AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Protocol AISG 2.0
Voltage, AISG Mode 10–30 Vdc

Electrical Specifications

Sub-module 1 | 2 1 | 2 1 | 2
Branch 1 2 3
Port Designation ANT 555-894 ANT AWS ANT WCS
AISG 2.0 Device Subunit E25A01P12 1/3 E25A01P12 2/4
License Band CEL 850, Band Pass
USA 700, Band Pass
USA 750, Band Pass
AWS 1700, LNA WCS 2300, LNA

Electrical Specifications, Band Pass

Frequency Range, MHz 555–894
Insertion Loss, maximum, dB 0.20
Return Loss, minimum, dB 20
Isolation, minimum, dB 60
Input Power, RMS, maximum, W 200
Input Power, PEP, maximum, W 2,000
3rd Order PIM, maximum, dBc -153
3rd Order PIM Test Method 2 x 20 W CW tones

Electrical Specifications, Rx Uplink

Frequency Range, MHz 1695–1780 2305–2315
Gain, nominal, dB 13.0 13.0
Noise Figure, typical, dB 1.4 1.8
Total Group Delay, maximum, ns 80 150
Return Loss, typical, dB 20 21
Insertion Loss - Bypass Mode, typical, dB 2.2 3.0
Return Loss - Bypass Mode, typical, dB 18 18

Electrical Specifications, Tx Downlink

Frequency Range, MHz 2110–2200 2350–2360
Insertion Loss, typical, dB 0.25 0.50
Total Group Delay, maximum, ns 15 50
Return Loss, typical, dB 22 22
Input Power, RMS, maximum, W 200 200
Input Power, PEP, maximum, W 2,000 2,000
Higher Order PIM, maximum, dBc -153 -153
Higher Order PIM Test Method 2 x 20 W CW tones 2 x 20 W CW tones

Block Diagram

Click on image to enlarge.

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity Up to 100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Mounting Hardware Weight 0.7 kg | 1.543 lb
Weight, without mounting hardware 9.6 kg | 21.164 lb

Product Classification

Product Type Tower mounted amplifier

General Specifications

RF Connector Interface 4.3-10 Female
RF Connector Interface Body Style Long neck

Dimensions

Height 247 mm | 9.724 in
Width 280 mm | 11.024 in
Depth 99 mm | 3.898 in
Ground Screw Diameter 5 mm | 0.197 in

Electrical Specifications

License Band, Band Pass CEL 850 | USA 700 | USA 750
License Band, LNA AWS 1700 | AWS 2000 | WCS 2300

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy Yes
Lightning Surge Current 10 kA
Lightning Surge Current Waveform 8/20 waveform
Operating Current at Voltage 210 mA @ 12 Vdc
Voltage, CWA Mode 10–18 Vdc
Alarm Current, CWA Mode 150 mA +/- 10 mA (10-18 VDC)

Electrical Specifications, AISG

AISG Carrier 2.176 MHz ± 100 ppm
AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Protocol AISG 2.0
Voltage, AISG Mode 10–30 Vdc

Electrical Specifications

Sub-module 1 | 2 1 | 2 1 | 2
Branch 1 2 3
Port Designation ANT 555-894 ANT AWS ANT WCS
AISG 2.0 Device Subunit E25A01P12 1/3 E25A01P12 2/4
License Band CEL 850, Band Pass; USA 700, Band Pass; USA 750, Band Pass AWS 1700, LNA WCS 2300, LNA

Electrical Specifications, Band Pass

Frequency Range, MHz 555–894
Insertion Loss, maximum, dB 0.20
Return Loss, minimum, dB 20
Isolation, minimum, dB 60
Input Power, RMS, maximum, W 200
Input Power, PEP, maximum, W 2,000
3rd Order PIM, maximum, dBc -153
3rd Order PIM Test Method 2 x 20 W CW tones

Electrical Specifications, Rx Uplink

Frequency Range, MHz 1695–1780 2305–2315
Gain, nominal, dB 13.0 13.0
Noise Figure, typical, dB 1.4 1.8
Total Group Delay, maximum, ns 80 150
Return Loss, typical, dB 20 21
Insertion Loss - Bypass Mode, typical, dB 2.2 3.0
Return Loss - Bypass Mode, typical, dB 18 18

Electrical Specifications, Tx Downlink

Frequency Range, MHz 2110–2200 2350–2360
Insertion Loss, typical, dB 0.25 0.50
Total Group Delay, maximum, ns 15 50
Return Loss, typical, dB 22 22
Input Power, RMS, maximum, W 200 200
Input Power, PEP, maximum, W 2,000 2,000
Higher Order PIM, maximum, dBc -153 -153
Higher Order PIM Test Method 2 x 20 W CW tones 2 x 20 W CW tones

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity Up to 100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Mounting Hardware Weight 0.7 kg | 1.543 lb
Weight, without mounting hardware 9.6 kg | 21.164 lb
Click on image to enlarge.
Click on image to enlarge.

Product Specification

Video

Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence

Product Specification

Video

Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence